,,

當前位置：浙江米勒潔凈設備科技有限公司 > 產品中心 > 不銹鋼人孔，衛生級人孔 > 衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司

衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司

產品型號：

DN150-DN600衛生級人孔規格齊全

品牌：

伊米勒牌衛生級人孔

≧1 套
￥145.00

所在地：

浙江溫州

更新日期：

2022-03-02

詳細信息

| 詢價留言

	加工定制：是		品牌：伊米勒牌衛生級人孔		型號：DN150-DN600衛生級人孔規格齊全
	類型：常壓，壓力快開人孔		用途：食品飲料，生物制藥，環保化工		型號：DN150-DN600衛生級人孔規格齊全

衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產
公司

                              圓型常壓快開人孔（圖一） 衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司

                      吊環壓力衛生級人孔（圖二）

                    帶手輪衛生級壓力人孔（三）

橢圓內開式衛生級人孔（圖四）

人孔是安裝在儲罐頂上的安全應急通氣裝置，通常與防火器、機械呼吸閥配套使用，既能避免因意外原因造成罐內急劇超壓或真空時，損壞儲罐而發生事故，又有起到安全阻火作用，是保護儲罐的安全裝置，特別適用于貯存物料以氮氣封頂?shù)墓绊敵汗蕖＞哂卸▔号欧拧⒍▔何搿㈤_閉靈活、安全阻火、結構緊湊、密封性能好、安全可靠等優點。
不銹鋼人孔，衛生級人孔，溫州人孔，常壓人孔，方形人孔，壓力人孔，溫州衛生級人孔，橢圓人孔，溫州人孔蓋，吊環人孔*生產商，衛生級人孔價格

　　人孔分為緊急泄壓人孔、防爆阻火呼吸人孔、罐頂人孔、罐壁人孔和帶芯人孔等。人孔直徑及人孔中心距地板尺寸　　人孔已有成型產品，直徑通常為600mm。人孔中心距地板一般為750mm。便于工作人員在安裝、清洗、維護時進出油罐和通風。不銹鋼人孔，衛生級人孔，溫州人孔，常壓人孔，方形人孔，壓力人孔，溫州衛生級人孔，橢圓人孔，溫州人孔蓋，吊環人孔*生產商，衛生級人孔價格人孔的用途相當廣泛，隨著食品，制藥等行業領域的需求與快速發展，衛生級人孔的應用更是必不可少，不銹鋼人孔主要和衛生級罐，衛生級泵等衛生級流體設備配套使用，用于方便維護罐內的潔凈度和方便工作人員維護。衛生級人孔的規格一般由DN150-DN600，溫州人孔已經成為國內市場人孔的代名詞，我們是溫州*衛生級人孔生產商，為您提供優質的溫州衛生級人孔。
衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；
　　非金屬油罐的人孔設在罐頂上，金屬油罐的人孔設在罐壁*下圈板上。大都為直徑600mm的圓孔，其中心距底板750mm，為油罐清洗或維修人員進出油罐用，又稱作道門。檢修清理油罐時刻利用人孔進行采光和通風。立式油罐的容量在5000m³以下時設1~2個人孔，5000m³以上的設2個人孔。人孔的安裝應與進出油管線相隔不大于90°。當只設一個人孔時，應將其置于罐頂透光孔的對面；當設2個人孔時，其中一個設在透光孔的對面，另一個應至少與*個人孔相隔90°。不銹鋼人孔，衛生級人孔，溫州人孔，常壓人孔，方形人孔，壓力人孔，溫州衛生級人孔，橢圓人孔，溫州人孔蓋，吊環人孔*生產商，衛生級人孔價格

　　人孔應有一個設在進出油管右側附近，并盡量使人孔正對罐室密閉門，以便人員進出、維修油罐和通風接管用。
衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；
由于人孔安裝在油罐的*下層體圈上，防滲漏就顯得特別重要。要求兩法蘭結合面必須保證其平直度，無飄扭現象。加強板和法蘭應盡量在整塊鋼板上切割而不拼接。法蘭和蓋板上圓型常壓快開人孔，加工有密封圈，在施工中要特別注意保護。密封用3mm厚石棉橡膠墊片，不允許有折裂。安裝人孔蓋板上緊螺栓時，要成對角均與用力，以防孔蓋變形。人孔種類的劃分　　1、以通信管塊容量劃分不銹鋼人孔，衛生級人孔，溫州人孔，常壓人孔，方形人孔，壓力人孔，溫州衛生級人孔，橢圓人孔，溫州人孔蓋，吊環人孔*生產商，衛生級人孔價格
溫州米勒流體設備科技有限公司*生產衛生級人孔，不銹鋼人孔，常壓人孔，壓力人孔，橢圓人孔，方形人孔，歡迎來電咨詢。
衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；
　　按人孔可容納規格為寬360mm、高250mm（標準的六孔管孔內徑90mm水泥管塊，簡稱標準塊）的管道斷面管塊或單孔管道管孔內徑90mm的數量，分為大、中、小圓型常壓快開人孔生產公司，
不銹鋼人孔不銹鋼人孔，衛生級人孔，溫州人孔，常壓人孔，方形人孔，壓力人孔，溫州衛生級人孔，橢圓人孔，溫州人孔蓋，吊環人孔*生產商，衛生級人孔價格衛生級人孔，溫州人孔，溫州衛生級人孔，衛生級人孔有限公司
三類。具體詳見表1。衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；

　　通信管道所設置人孔的大小，應以通信管道的遠期容量設置。不應只考慮本期建設通信管道容量。

　　2、以人孔的通向劃分衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；
　　以人孔的通向劃分可分為直通人孔、三通人孔、四通人孔和斜通人孔，具體詳見下表1。其中，斜通人孔又分為15°、30°、45°、60°、75°共五種。每種斜通人孔的角度，可適用于±7.5°范圍以內。
衛生級人孔，溫州人孔，溫州衛生級人孔，衛生級人孔有限公司

　　3、以人孔上覆承受負荷能力劃分
以人孔上覆承受負荷能力劃分可分為汽-20級和汽-10級兩種圓型常壓快開人孔生產公司人孔的安裝及維護，人孔因位于油罐下部，人孔承受很大的液體壓力，為了防止?jié)B漏，對人孔的安裝質量必須嚴格要求。法蘭和蓋板上加工有密封水線，在施工中要注意保護，以免在使用時發生滲油。每次拆下人孔時要做標記，以免再裝時錯位，影響嚴密性。安裝人孔蓋板上螺母時，要成對對角均勻用力，以防蓋板變形或用力不均而造成的滲油。

溫州米勒流體設備科技有限公司*生產衛生級人孔，不銹鋼人孔，常壓人孔，壓力人孔，橢圓人孔，方形人孔，歡迎來電咨詢。

——————————————————————————————————————————————

英文產品介紹：
Manhole is installed in the tank on top of the safety of emergency ventilation devices, usually associated with fire, mechanical breathing valve supporting the use of, both to avoid due to the causes of accidents caused by tank sharp overpressure or vacuum damaged tanks and accidents, but also With constant pressure discharge, constant pressure inhalation, opening and closing a flexible, safe fire retardant, compact structure, good sealing performance, safety and reliability advantages.

Manhole into emergency relief manhole explosion-proof fire retardant breathing manhole, tank top manhole, the manhole of the tank wall and with a core manhole. The diameter of the manhole and manhole center from the floor size of manhole has been molding products, diameter usually 600mm. Manhole center from the floor general for the 750mm. To facilitate staff in the installation, cleaning, maintenance and out of the tank and ventilation.

Non-metallic tank manhole located in the tank on top of the metal tank manhole located in the tank wall to the next circle board. Most of the 600mm diameter hole at its center from the base plate 750mm, tank cleaning or maintenance personnel in and out of the tank, also known as the door. Maintenance clean up the tank moment manhole, light and ventilation. Vertical tank capacity of less than 5000m ³ set 1-2 hole, 5000m ³ above located two holes. The installation of the manhole with access to the oil pipeline at intervals of not more than 90 °. When only set up a manhole, it should be placed in a tank top, light transmission hole opposite; when set up two individual holes, one located at the opposite of light transmission hole, the other should be at least 90 ° apart with the first individual hole .

Manhole should be one in and out near the pipeline right side and try to make the holes are confined to the tank room door, so that personnel access, and maintenance of tanks and ventilation to take over.

Manhole is installed in the tank of the lowest body ring, anti-leakage is particularly important. Asked the two flange joint surface must ensure that its flatness, no floating twist phenomenon. Strengthen the board and the flange should be cut without stitching on the block plate. On the processing of the flange and the cover ring, pay special attention to protection during construction. Sealing rubber gaskets 3mm thick asbestos, not allowed to have fractured. Install the manhole cover bolt, diagonally and force, to prevent the hole cover deformation. A manhole kind of division of a communication pipe capacity divided
The Wenzhou the Dekang professional production of sanitary grade manhole, stainless steel manhole, atmospheric hole, the pressure hole, oval hole, square hole, please contact us.

Manhole can accommodate specifications for a wide 360mm high 250mm (standard tin pore diameter 90mm cement pipe blocks, pipe section referred to as the standard block) the number of tube block or single-hole pipe pore diameter 90 mm, divided into large, and small

Stainless steel manhole
hree categories. Concrete shown in Table 1.
衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；
Communication pipeline set the size of the manhole, and should set long-term capacity of the communication pipe. Should not only consider the current construction communications pipeline capacity.

2, man-hole leading to the division of

Straight-through manhole manhole leading to the division can be divided into three links manhole Stone manholes and oblique Walter Kong, specifically detailed in the table below. Among them, the oblique Walter Kong is divided into 15 °, 30 °, 45 °, 60 °, 75 ° a total of five. Each oblique Walter Kong's point of view, applicable to within ± 7.5 °.

To the manhole cover to bear the load capacity is divided
Withstand the load capacity can be divided into installation and maintenance of steam -20 and steam -10 two kinds of people hole manhole cover, manhole manhole under a lot of fluid pressure in the tank the lower part, in order to prevent infiltration leakage, the quality of the installation of the manhole must be strict. On the processing of the flange and the cover sealed waterline in the construction, we need to protect, in order to avoid the use of oil leakage. Do mark each manhole removed, so as not loaded when the dislocation, affecting rigor. Install the nut on the manhole cover, to be paired diagonal evenly, to prevent the cover deformation or uneven force caused by oil leakage.
The Wenzhou the Dekang professional production of sanitary grade manhole, stainless steel manhole, atmospheric hole, the pressure hole, oval hole, square hole, please contact us.

歡迎來電咨詢衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司；

產品搜索
產品分類
留言
- 聯系人：張肖強
- 電　話：0577-85822921
- 手　機：15858585519
- 傳　真：0577-86810558
- 郵　編：325024
- 地　址：中國溫州經濟技術開發區沙城工業園
- 網　址： https://dekang.cn.goepe.com/
  http://www.hllxxcl.cn

衛生級人孔，溫州人孔，溫州衛生級人孔，常壓快開人孔生產公司

產品搜索

產品分類

留 言

留言